Externally Controlled Warning Lights
Externally Controlled lights are pre-set warning lights which completely bypass the internal timing/flash controllers, to be slaved into working through commands of another flash source with accuracy. Another flash source can be any non-proprietary controller capable of providing a 12-24 VDC signal with the support of the input current required by the selected light. These lamps allow users to take advantage of TOMAR's class-leading optics and construction, while being controlled by nearly any system.
Note: These lamps differ than a lamp in steady-burn mode, as steady-burn still uses the internal controller and may provide a slight delay in timing. When using any type of external controller to flash TOMAR lights, one of the following models should be used.