PRODUCT OVERVIEW
TOMAR’s Add-On Emitter Kit is designed to externally install a full-range strobe infrared emitter capable of 2,500+ feet distance of signal onto an existing light bar.
T792HL Series Emitters Overview
The model T792HL family of TOMAR STROBECOM II emitters are used on authorized vehicles to activate TOMAR STROBECOM II OSPOCV2 & DETOC Series, along with GTT OPTICOM* optical preemption and priority control systems. The T792HL-LOPRO-R is an emitter with a remote power supply which can operate on either 12 or 24 VDC and is designed for installation where available lighthead space is limited. Configured via optional software, the T792HL-LOPRO-R can emit any of 10,000 GTT OPTICOM vehicle ID’s in 10 classes of either command (high) or advantage (low) priorities. The T792HL-LOPRO-R is equipped with continuous self-diagnostics with visual feedback and a highly adaptable automatic disable system to prevent intersection lockup. An optional visible light filter can be added to make emitter operation invisible on undercover, transit, or maintenance vehicles.
The T792HL Series emitters include an SAE J1708/J1587 interface that can be used for on/off control, disable override, and code programming from an onboard vehicle computer.
Mounting Bracket Options
The powder-coated steel emitter mounting brackets allow you to install TOMAR’s Low Profile Remote (LOPRO-R) Strobe Infrared Emitters to an existing lightbar, including the following listed competitor lightbars.
Mounting Bracket Light bar Compatibility
Note: Clearance of at least 2.1 inches is required between bottom of lightbar and vehicle roof where emitter is to be located.
- TOMAR Bracket: Allows the TOMAR LOPRO-R Emitter to be mounted anywhere along the mounting-track on the bottom side of the light bar. Compatible with:
-
Whelen Bracket: Allows the TOMAR LOPRO-R Emitter to be mounted anywhere along the mounting-track on the bottom side of the light bar. Compatible with:
- Whelen Liberty II
- Whelen Freedom IV**
- Any others with a lower mounting-track distance of 4 3/4″ apart and groove depth of 3/8″
-
Federal Signal Bracket: Allows the TOMAR LOPRO-R Emitter to be mounted on either the driver or passenger side of the bar. Compatible with:
- Federal Signal Valor
- Federal Signal Vision***
T792HL Emitter SPECS
- Range: 2500+/- feet in high power, 1000+/- feet in low power
- Output: Xenon flash compatible with GTT® OPTICOM®
-
Power Requirements:
- Input voltage: 9 to 30VDC
- Input current: 2.8A average @ 12.8V, 1.4A average @ 25.6V
- Construction: Strobe features a pure gold vacuum-metallized reflector for optimal infrared reflection, sealed inside an IP69K waterproof lens using TOMAR’s patented T-Seal™. Strobe is mated to a black powder-coated metal housing for long-lasting durability – the same construction found on the mounting bracket. Remote power supply is fully potted and features a 2-position on/off switch.
-
Size:
- Emitter: 5.28” W x 4.15” D x 2.1″ H
- Power Supply: 4.5″ W x 3.87″ D x 1.75″ H
-
Weight:
- 2.5 lbs. (1.14kg) *with power supply
- 1.1 lbs. (0.5kg) *without power supply – emitter only
Why Strobe and not IR LED?
A TOMAR strobe emitter puts out over 100 times more peak Infrared power in its flash than a LED emitter does. The TOMAR strobe uses some of this peak power advantage to project a substantially wider beam, making it easier for an intersection or Strobeswitch gate access-point to detect an approaching emergency vehicle at higher off-axis angles. This also allows TOMAR emitters to have a standard performance rating of over 2,500 feet, and in many cases, a line-of-sight range of a mile. All of this equates to vehicle preemption taking place sooner, and reducing risk.
Product Documents
- Emitter Coding Manual
- Strobecom II System Manual
- T792HL and T792HL-R Emitter Product Install Instructions
- T792HL and T792HL-R Installation and Operation
Brochures
- TOMAR's 970 Scorpion and Black Widow Add-On Kit Brochure
- Whelen Add-On Kit Brochure
- Federal Signal Add-On Kit Brochure
- STROBECOM II Catalog
- Low Profile Mount Preemption Emitter Brochure
- T792HL/T792HL-R PREEMPTION EMITTER BROCHURE
- Motorcycle Brochure
- Fire and EMS
NOTE:
*Global Traffic Technologies, GTT, and Opticom are trademarks of Miovision Technologies Incorporated and not affiliated with TOMAR Electronics Inc.
**Whelen, Liberty II, and Freedom IV are trademarks of Whelen Engineering Company, Inc. and are not affiliated with TOMAR Electronics Inc.
***FedSig, Vision, and Valor are trademarks of Federal Signal Corporation and are not affiliated with TOMAR Electronics Inc.
3D STEP FILES
The TOMAR Difference
TOMAR manufacturers some of the longest lasting, highest performing automotive warning and illumination lighting in the industry. Some of the technology which sets TOMAR apart from the rest can be found in our patented T-Seal™ and performance-based Clear Vision Optics™.
Learn More